Call (866) 383-1857
Appliance repair · Massachusetts

Broken appliance?
Get it fixed.

When a household appliance stops working, you need a straight answer: what is wrong, what the fix is, and whether repair is worth it. Massachusetts Appliance Repair Pros connects homeowners across Massachusetts with independent local appliance repair providers who diagnose the machine in plain words and repair it where it makes sense — or tell you honestly when replacement is the better call.

✓ 10 cities served✓ All major brands✓ Clear diagnosis first✓ Repair-or-replace, honestly

A washer that stops mid-cycle leaves a drum full of water and a pile of wet laundry. A refrigerator that stops cooling puts a week of groceries at risk within hours. A dryer that will not heat, an oven that stays cold, a dishwasher that leaves dishes dirty — every one of these is a small household crisis, and every one of them has a cause that can be found by looking at the machine, not by guessing. That is how the providers on this site work: they look, they test, they explain what they found, and then they fix it.

This site covers ten Massachusetts cities, from the South Shore to the Berkshires and out to Cape Cod: Scituate, Gardner, Chelsea, Salem, Gloucester, Billerica, North Adams, Pittsfield, Harwich, and Middleboro. Each city has its own page, with the neighborhoods served, the roads providers travel, and the landmarks they work near. The service area is Massachusetts — the whole state is the point, and the ten cities below are where the work starts.

The machines covered are the ones every Massachusetts home depends on. Washers and dryers, front-load and top-load. Refrigerators and freezers, including ice makers. Ovens and ranges, gas and electric. Dishwashers and microwaves. All major brands — Samsung, LG, Whirlpool, GE, Maytag, and Kenmore among them — are serviced by the independent providers in the network, and the diagnosis always comes first, before any part is ordered or any work begins.

Every repair starts the same way, and that sameness is the point. The provider arrives, looks at the machine, and tests it — the drain pump on a washer that will not drain, the heating element on a dryer that will not heat, the condenser coils on a refrigerator that has gone warm. The fault is named in plain words before any work begins, and the fix is explained the same way. No jargon, no pressure, no part ordered on a guess. That is the whole service, and it is the same in Scituate as it is in Pittsfield.

Massachusetts homes give appliances a hard life, and the honest local context matters. Cold winters mean dryers run long loads and furnaces dry the air; humid summers make refrigerators and freezers work hardest, and ice makers fail most when the temperature climbs. The housing stock is old across these ten cities — triple-deckers in Chelsea, Federal-era homes in Salem, mill housing in North Adams and Pittsfield, coastal cottages in Scituate, Gloucester and Harwich, mid-century ranches in Billerica and split-levels in Gardner. Old wiring, old water lines and old machines are the everyday reality behind most repair calls, and a provider who has worked in these houses knows what to look for before opening a panel.

Services

Ten repair services

Ten repair services, each with its own page. Every page explains the faults that service covers, what causes them, and how the provider finds the fault — in plain words, without jargon.

01

Washer Repair

Washer repair in Massachusetts covers diagnosis and repair of front-load and top-load machines that stop draining, stop spinning, leak, shake, or…

Washer Repair →
02

Refrigerator Repair

Refrigerator repair in Massachusetts covers fridges that stop cooling, leak water onto the kitchen floor, run loudly, or build up ice where it should…

Refrigerator Repair →
03

Dryer Repair

Dryer repair in Massachusetts covers dryers that will not heat, will not start, will not spin, or take far too long to dry a load. A technician…

Dryer Repair →
04

Oven & Range Repair

Oven and range repair in Massachusetts covers gas and electric ovens that will not heat, cook unevenly, or show error codes, along with cooktops and…

Oven & Range Repair →
05

Dishwasher Repair

Dishwasher repair in Massachusetts covers dishwashers that will not drain, will not clean, leak onto the kitchen floor, or stop before the cycle…

Dishwasher Repair →
06

Washing Machine Repair

Washing machine repair in Massachusetts means full-machine diagnosis for every type of machine, from compact units to large-capacity front-load and…

Washing Machine Repair →
07

Freezer Repair

Freezer repair in Massachusetts covers chest and upright freezers that will not freeze, build up frost, run constantly, or let food thaw. A…

Freezer Repair →
08

Ice Maker Repair

Ice maker repair in Massachusetts covers ice makers in refrigerators and standalone units that will not make ice, will not dispense it, or leak water…

Ice Maker Repair →
09

Washer and Dryer Repair

Washer and dryer repair in Massachusetts covers the laundry pair as one job, with both machines diagnosed and repaired in a single visit. A…

Washer and Dryer Repair →
10

Microwave Repair

Microwave repair in Massachusetts covers countertop and over-range microwaves that will not heat, will not start, or have door, turntable, and…

Microwave Repair →
How it works

Three steps, no forms

There is no form to fill in and no email to wait on. The phone is the way in, and the conversation is short.

01

Call and describe it

What the machine does — or stopped doing. The make, the model if you know it, and the symptom in your own words. A washer that will not drain sounds different from a washer that will not spin, and that difference points the provider in the right direction before anyone leaves the house.

02

Get a clear diagnosis

The provider looks at the machine, tests it, and tells you the fault and the fix in plain words. You hear what is wrong, what part is involved if a part is involved, and what the repair entails — before any work starts.

03

Repair, or honest advice

The machine is fixed where it makes sense. And where it does not — an old machine with a failed compressor, a repair that costs more than the machine is worth — you are told straight, so you can put the money toward a replacement instead.

10Services
10Cities served
6Major brands
25Cities planned

Diagnosis before parts, always

A repair that starts with a part order is a guess. A repair that starts with testing is a diagnosis. The providers here test first: the drain pump, the fill valve, the heating element, the thermal fuse, the compressor, the control board — whatever the symptom points to. That is the difference between a fix that holds and a part swapped on a hunch.

It also protects you. When the fault is a clogged filter or a kinked hose, there is nothing to buy and nothing to replace. When the fault is a failed motor or a cracked drum, you hear it before the work begins, and you can decide with the facts in front of you.

What affects the cost of a repair

No two repairs cost the same, and anyone who quotes a flat price for every job has not seen your machine. The part matters most — a drain pump and a control board are very different jobs. The age and type of the appliance matter too: an older machine may need a part that takes longer to source, and a built-in appliance takes longer to reach than a freestanding one. Access matters — a stacked washer and dryer in a closet, a dishwasher built into cabinetry, a refrigerator wedged between counters all add time. The brand matters as well, because parts availability varies by make and model.

The honest way to think about cost is repair versus replacement. A young machine with one failed part is usually worth repairing. An old machine with a major failure — a sealed-system fault in a refrigerator, a cracked outer tub in a washer — often is not. A straight answer on that question is worth more than any quote, and it is what the diagnosis is for.

Common faults, and what causes them

Washers most often stop draining because of a clogged drain pump filter, a blocked drain hose, or a failed drain pump. They stop spinning because of a worn drive belt, a faulty lid switch, or a motor fault. They leak from a worn door seal, a loose hose connection, or a cracked tub. They shake because the load is unbalanced or the levelling feet have shifted — and because a machine that was never levelled properly will walk across the floor on every spin.

Refrigerators most often stop cooling because of dirty condenser coils, a failed evaporator fan, or a compressor fault. The classic split — freezer cold, fridge warm — usually points to airflow: a fan, a damper, or ice blocking the vents. Dryers most often stop heating because of a failed heating element or a blown thermal fuse, and both are often downstream of a blocked vent. Ovens most often stop heating because of a failed igniter on gas models or a burned-out element on electric ones. Dishwashers most often stop cleaning because of a clogged filter or blocked spray arms, and stop draining because of a blocked drain hose or a failed drain pump.

Repair or replace: how to think about it

Age is the first question. A machine under eight years old with a single fault is usually a repair. A machine past twelve years with a major fault is usually a replacement. Between those lines, the part cost and the machine's general condition decide. A refrigerator that has already had two repairs in two years is telling you something; a washer on its first fault in six years is telling you something else.

The second question is the fault itself. Some faults are cheap and definitive — a thermal fuse, a door latch, a drain pump filter. Some are expensive and uncertain — a sealed-system leak, a control board that may or may not be the whole story. A provider who explains which kind of fault you have, in plain words, is giving you the information you need to decide well.

Frequently asked questions

Which appliances do you repair in Massachusetts?

Washers, dryers, refrigerators, freezers, ice makers, ovens and ranges, dishwashers, and microwaves — all major brands, including Samsung, LG, Whirlpool, GE, Maytag, and Kenmore. Each service has its own page on this site with the faults it covers.

Which Massachusetts cities do you cover?

Ten cities: Scituate, Gardner, Chelsea, Salem, Gloucester, Billerica, North Adams, Pittsfield, Harwich, and Middleboro — across Plymouth, Worcester, Suffolk, Essex, Middlesex, Berkshire, and Barnstable counties. Each city has its own page.

How does the repair process work?

Call and describe what the machine is doing — or stopped doing. An independent local provider looks at the machine, tests it, and tells you the fault and the fix in plain words before any work starts. The machine is repaired where it makes sense, or you are told honestly when replacement is the better call.

Do you charge for a diagnosis?

Diagnosis is part of the visit: the provider looks at the machine and tells you what is wrong before any repair work begins. What the repair itself involves — the part, the access, the time — is explained in plain words first, so you can decide with the facts in front of you.

My washer will not drain. Is that a repair or a replacement?

Most not-draining washers are repairs: a clogged drain pump filter, a kinked or blocked drain hose, or a failed drain pump. A provider checks the filter and hose first, then the pump. Only if the fault turns out to be something structural — a cracked tub, for example — does replacement enter the conversation.

My refrigerator is warm but the freezer is cold. What causes that?

That split almost always points to airflow between the compartments: a failed evaporator fan, a stuck damper, or ice blocking the vents. The freezer makes the cold air; the fan moves it to the fridge. When the fan stops or the vents block, the freezer stays cold and the fridge warms up.

Washer full of water? Fridge warming up?

Call now — describe the problem and get a straight answer about what happens next.

Call (866) 383-1857 →